This operation is controlled by the inlet ball valve

1. This operation is controlled by the inlet ball valve. When the pressure is no longer increased and does not exceed the rated operating pressure, the process time shall not be less than 3 minutes; When the air release valve spray liquid, close the air release valve; 3. Connect pure air, open the back-blowing valve and use a back-blowing pressure of more than 20% of the filter pressure, back-blowing 2 to 3 times, each for 3 to 4 seconds; 7.ufeffTitanium rod filters are widely used in decarbonization and filtration in the pharmaceutical and chemical industries such as large infusion and injection production lines.

Each time it decreases, the backflushing pressure should be increased and the backflushing time should be extended; Bacteria treatment can be sterilized by steam at 121°C for 30 minutes. Open the air release valve first, and then open the ball valves at the inlet and outlet; Pay attention to the air release valve after tuing on the pump. Observe the drain outlet until the clean liquid is discharged. After connecting the stainless steel beer tanks filter, backflush with distilled water for 5-15 minutes.

Observe the gauge pressure pointer, the gauge pressure should be increased slowly. At present, more and more titanium rod filters are used, but how do they operate and how to use them correctly and safely? The following steps are detailed steps for you to take a look. The backflush pressure should be greater than the filter pressure; After backflushing, close the blowdown valve, prepare for the next batch of filtration process, and observe the filtration flux of the previous batch.

After backflushing, close the backflush valve and open the ball valve of the feed inlet.. Observe the holding time of constant pressure and the quantity of materials and calculate the unit flow; 5． After filtering a batch of materials, close the inlet and outlet ports and open the drain valve; 6

China Customised Tank...