The traditional repair welding method is more difficult

The surface is smooth, no cracks, no bubbles in the welding seam, and the lining structure should be well-balanced and free of burrs. , Again aggravate corrosion. The special inteal tie rod structure makes the mechanical performance more reasonable. The welding rod adopts stainless steel electrode, ER308L, all adopt the tungsten argon gas shielded welding process;  After making and installing, make full water test. How is the stainless steel combined water tank made? Understand briefly.

The traditional repair welding method is more difficult, and thermal stress will cause greater damage to the equipment; brushing epoxy-type corrosion-resistant materials will cause cracks and peeling due to the surface adhesion and expansion coefficient.ufeffThe stainless steel combined water tank uses a special sealing strip and a fully bolted connection structure, which is easy to assemble, Bright Beer Tanks factory and will not leak or leak tightly. Before welding, the groove should be grooved according to the regulations of GB/T985-1998, and the outer dimension of the weld should conform to the regulations of JB/T794-1999 , And to ensure that there is no false welding, no slag inclusion; 3. There are no special requirements on the installation site. The shape should meet the requirements of the user, and the volume can meet all design requirements.

At present, most effective methods use polymer composite materials, among which the Fuschlan series are more mature. The stainless steel combined water tank is generally made of Cr stainless steel. For different equipment, different operating conditions, and different forms of corrosion and leakage, the use of corresponding technical products can quickly, simply and effectively protect the equipment, especially due to the comprehensive performance of polymer composite materials such as chemical corrosion resistance and bonding performance It avoids the adverse effects of traditional repair welding and protection of traditional anti-corrosion materials, makes the repaired equipment life even longer than new equipment, fundamentally solves the cause of corrosion and leakage, helps companies improve equipment management and reduce maintenance Cost and improve the competitiveness of enterprises.

The stainless steel combined water tank is the most widely used alteative to the FRP water tank in the construction industry. Because the material does not contain nickel, the corrosion and leakage problems of the welding part of the water tank during use are more common. 1. After the installation of the water tank is completed, clean and decontaminate inside and outside. Standard molded panels; free assembly, no lifting equipment. 

China Customised Tank...